working principle: The measured pressure is converted into a capacitance variable by a capacitive sensitive element, directly converted into a digital signal by the A/D circuit, and sent to the microprocessor after conversion. The digital signal corrected by the operation is then converted into a 4~20mADC output signal by D/A. Send to display/adjustment instrument or DCS and other devices. The communication line converts the measured pressure digital signal from the dimensional processor into a frequency signal and superimposes it on the 4~20mADC analog signal, which is received by the corresponding HART terminal equipment. Features: ·High stability and reliability The high-sensitivity pressure-sensitive element is a fully sealed design, and the stress isolation structure and overvoltage self-protection ensure the stability and reliability of the sensitive element. ·Automatic compensation function The correction coefficients of pressure and temperature characteristics stored in the EEPROM are used for the main control unit microprocessor to perform linear and temperature automatic compensation, so that the 3151 can only transmit with high precision and little influence of temperature. ·Digital communication, data storage HART Communicator communication enables remote setting, detection and diagnosis. And the set configuration data is stored in the non-volatile EEPROM of the circuit board, and these data will not be lost after the power is turned off. Power cycle the transmitter to resume operation immediately. ·Five-digit LCD output display The five-digit LCD indicator can display the digital reading of the measured pressure (including engineering units, such as: kpa, kgf/c㎡, mbar, mmH2O, etc.), the percentage of the range (%) and the output current (mA). ·Configuration protection In order to prevent the configuration data of the transmitter from being changed arbitrarily, the stored data can be locked through the protection switch. ·Local zero and span adjustment The S and Z buttons of the main control unit are used by the user to adjust the zero point and span of the transmitter without a configuration device. ·Explosion-proof mark The explosion-proof type of this instrument includes intrinsic safety (Ex ia IIC T5) and flameproof type (Ex d II C T5), all of which have passed the national explosion-proof standard certification. · Strong interchangeability of parts Regardless of the range and output form, the flanges, connectors, electrical housings, display heads, end caps and mounting brackets can be interchanged, and the intelligent circuit boards can also be interchanged. After replacing the electronic version, you need to re-set the zero point and range . The sensors can also be interchanged, and the measuring range can also be changed by replacing the sensor, but it also requires recalibration after replacement. Software function: Users can use the 3151 configuration software and HARTmodem provided by Xiyi to realize testing, configuration and fine-tuning in computer class, and users can also use HART communicator to realize software functions. ·test The 3151 transmitter can continuously perform self-tests during operation. If you want to detect 4~20mADC loop, you can set the transmitter to constant current output mode. The set data include: 4~20mA point, engineering unit, damping time, output mode (linear or square root) and related management information. ·Self-diagnosis The contents of diagnosis include: faults of sensitive components, A/D conversion faults, memory faults and communication errors, etc. ·Configuration device PC configuration device HART communicator.
Ask Latest Price
Video Channel